Accessories for Farstrup chairs
There are a wide range of functions and accessories that can be purchased for Farstrup's armchairs, each of which serves a purpose that can be a support or help in everyday life, or contribute to extra comfort - the different options for accessories are reviewed and illustrated below.
Coffee tray (0727)
If you appreciate always having a small tray nearby so you can always put your cup down - then the coffee tray (which is mounted with a bracket in the armrest) may be an accessory that will suit you.
Dining tray (0722, 0724)
If you appreciate enjoying a meal in your armchair - then the dining tray (which is mounted with a bracket in the armrest) may be an accessory that will suit you.
Remote control plate (0715)
If you want to have your remote control for the armchair close at hand - a plate can be mounted on the armrest to hang the remote control on.
External locking handle (0710, 0713)
The chair can be locked in the desired position with the external locking handle, which is easy and simple to operate.
Channel sewing (0561, 0567)
A vertical stitching with soft foam in the channels for extra lumbar support.
Channel stitching is possible on the Plus and Casa series.
Inflatable lumbar support (0760)
Extra lumbar support that you can inflate yourself. The bottom of the lumbar support is located approx. 5 cm from the seat
(shown with dotted lines).
Protective pad (0700, 0701)
The pad is sewn with non-slip urine cloth and cotton to absorb liquid. Use washable fabric. The pad
Machine washable at max. 40 degrees, however, spinning is not recommended, drip drying is recommended.
The cushion is placed on the seat so that it covers 10 cm of the back, as shown in the picture below.
Removable seat cover and urinal cloth (0720):
The molded seat is covered with a urine cloth, and then the chair's removable seat is mounted.
cover. Use washable fabric, and be aware that some textiles shrink more than others.
Tumble board (0235, 0260)
Tilting boards that can be mounted on Farstrup's stools can be used for vein pump exercises or simply to rest the legs (mounted between the legs on the footstool).
Seat lift with 1 motor and manual backrest adjustment (0736)
The stepless backrest is adjusted manually using the body weight. The seat lift is operated using a remote control. Please note that the back must be in a fully upright position before the seat lift can be activated.
Seat lift and remote-controlled backrest adjustment with 2 motors (0738)
The two motors make it possible to operate the seat lift and the stepless backrest adjustment independently of each other using a remote control. Please note that the backrest must be in a fully upright position before the seat lift can be activated.
Multi-chair with footrest and seat lift (3 motors)
The illustrations below show the functions of the Multi chair. All functions are with remote-controlled stepless adjustment.
When using the seat lift, both armrests and seat are included. Please note that the footrests must be fully retracted before the seat lift can be activated. The multi-chair is also available with a 2-part seat/footrest.
Do you have any questions?
If you have any questions about the above features or accessories, you are always welcome to contact us at Farstrup Furniture, you will find our contact information here. HERE . Alternatively, you can contact one of our many nationwide dealers, you will find your nearest dealer HERE .
